3Com S7906E Command Reference Manual page 483

Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
DHCP packet deal mode:
Table 1-1 display ip interface command output description
current state
Line protocol current state
Internet Address
Broadcast address
The Maximum Transmit Unit
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
ARP packet input number:
Request packet:
Reply packet:
Unknown packet:
TTL invalid packet number
0
0
0
0
0
0
0
0
0
0
0
global
Field
0
0
0
0
1-2
Description
Current physical state of an interface
Current state of the network layer protocol
IP address of an interface followed by:
Primary: Identifies a primary IP address, or
Sub: Identifies a secondary IP address.
Broadcast address of the subnet attached to
an interface
Maximum transmission units on an interface
Unicast packets, bytes, and multicast packets
received on an interface
Unicast packets, bytes, and multicast packets
sent on an interface
Total number of ARP packets received on an
interface, including
ARP request packets
ARP reply packets
Unknown packets
Number of TTL-invalid packets received on an
interface