3Com S7906E Command Reference Manual page 1220

View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
as-number: AS number, in the range of 1 to 65535.
Description
Use the display msdp sa-count command to view the number of (S, G) entries in the SA cache.
Note that:
If neither all-instance nor vpn-instance is specified, this command will display the information on
the public instance.
This command gives the corresponding output only after the cache-sa-enable command is
executed.
Related commands: cache-sa-enable.
Examples
# View the number of (S, G) entries in the SA cache for the public instance.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information of VPN-Instance: public net
Number of cached Source-Active entries, counted by Peer
Peer's Address
10.10.10.10
Number of source and group, counted by AS
AS Number of source
? 3
Total 5 Source-Active entries
Table 1-4 display msdp sa-count command output description
MSDP Source-Active Count Information of
VPN-Instance: public net
Number of cached Source-Active entries,
counted by Peer
Peer's Address
Number of SA
Number of source and group, counted by AS
Number of SA
5
Number of group
3
Field
1-8
Description
Number of SA messages for the public network
cache
Number of (S, G) entries counted by peer
Address of the MSDP peer that sent SA
messages
Number of (S, G) entries from this peer
Number of cached (S, G) entries, counted by AS