C-Bsr Global; C-Bsr Group - 3Com S7906E Command Reference Manual

Examples
# Enable administrative scoping in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr admin-scope

c-bsr global

Syntax
c-bsr global [ hash-length hash-length | priority priority ] *
undo c-bsr global
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
hash-length: Hash mask length in the global scope zone, in the range of 0 to 32. If you do not include
this argument in your command, the corresponding global setting will be used.
priority: Priority of the C-BSR in the global scope zone, in the range of 0 to 255. If you do not include this
argument in your command, the corresponding global setting will be used. A larger value of this
argument means a higher priority.
Description
Use the c-bsr global command to configure a C-BSR for the global scope zone.
Use the undo c-bsr global command to remove the C-BSR configuration for the global scope zone.
By default, no C-BSRs are configured for the global scope zone.
Related commands: c-bsr group, c-bsr hash-length, c-bsr priority.
Examples
# Configure the router to be a C-BSR for the global scope zone in the public instance, with the priority of
1.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr global priority 1

c-bsr group

Syntax
c-bsr group group-address { mask | mask-length } [ hash-length hash-length | priority priority ] *
undo c-bsr group group-address
1-4