Isis Timer Csnp - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Examples
# Configure VLAN-interface 10 to send small Hello packets.
<Sysname> system-view
[Sysname] interface vlan-interface10
[Sysname-Vlan-interface10] isis small-hello

isis timer csnp

Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
View
Interface view
Default Level
2: System level
Parameters
seconds: Specifies on the DIS of a broadcast network the interval in seconds for sending CSNP packets,
ranging from 1 to 600.
level-1: Applies the interval to Level-1.
level-2: Applies the interval to Level-2.
Description
Use the isis timer csnp command to specify on the DIS of a broadcast network the interval for sending
CSNP packets.
Use the undo isis timer csnp command to restore the default.
The default CSNP interval is 10 seconds.
If no level is specified, the CSNP interval applies to both Level-1 and Level-2.
This command only applies to the DIS of a broadcast network, which sends CSNP packets
periodically for LSDB synchronization.
Examples
# Configure Level-2 CSNP packets to be sent every 15 seconds over VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis timer csnp 15 level-2
1-44

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents