Display Bgp Peer - 3Com S7906E Command Reference Manual

Field
Origin attribute of the path:
i
Origin
e
?

display bgp peer

Syntax
display bgp peer [ ip-address { log-info | verbose } | group-name log-info | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: IP address of an peer to be displayed, in dotted decimal notation.
group-name: Name of a peer group to be displayed, a string of 1 to 47 characters.
log-info: Displays the log information of the specified peer.
verbose: Displays the detailed information of the peer/peer group.
Description
Use the display bgp peer command to display peer/peer group information.
Examples
# Display the detailed information of the peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port:
Configured: Active Hold Time: 180 sec
Received
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Indicates the route is interior to the AS.
Summary routes and routes defined using the network command are
considered IGP routes.
Indicates that a route is learned from the exterior gateway protocol (EGP).
Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means.
Local - 1029 Remote - 179
: Active Hold Time: 180 sec
Description
Keepalive Time: 60 sec
1-17