Encap-Data-Enable; Import-Source - 3Com S7906E Command Reference Manual

AS
Number of source
Number of group

encap-data-enable

Syntax
encap-data-enable
undo encap-data-enable
View
Public instance MSDP view, VPN instance MSDP view
Default Level
2: System level
Parameters
None
Description
Use the encap-data-enable command to enable register message encapsulation in SA messages.
Use the undo encap-data-enable command to disable register message encapsulation in SA
messages.
By default, an SA message contains only an (S, G) entry. No register message is encapsulated in an SA
message.
Examples
# Enable register message encapsulation in SA messages in the public instance.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable

import-source

Syntax
import-source [ acl acl-number ]
undo import-source
View
Public instance MSDP view, VPN instance MSDP view
Field
1-9
Description
AS number. "?" indicates that the system was
unable to obtain the AS number.
Number of multicast sources from this AS
Number of multicast groups from this AS