Filter-Policy Import (Ipv6 Mbgp Address Family View) - 3Com S7906E Command Reference Manual

protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or
static at present. If no protocol is specified, all routes will be filtered when advertised.
process-id: Process ID of the routing protocol, ranging from 1 to 65535. This argument is available
when the protocol is isisv6, ospfv3, or ripng.
Description
Use the filter-policy export command to filter outgoing routes using a specified filter.
Use the undo filter-policy export command to cancel the filtering of outgoing routes.
By default, no outgoing routing information is filtered.
If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol is
specified, all redistributed routes are filtered.
Examples
# Reference IPv6 ACL 2001 to filter all outgoing IPv6 MBGP routes.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]filter-policy 2001 export

filter-policy import (IPv6 MBGP address family view)

Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
acl6-number: Specifies the number of a basic or advanced IPv6 ACL used to match against the
destination of routing information. The number is in the range 2000 to 3999.
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of
routing information. The name is a string of 1 to 19 characters.
Description
Use the filter-policy import command to configure the filtering of inbound routing information using a
specified filter.
Use the undo filter-policy import command to cancel the filtering of inbound routing information.
By default, inbound IPv6 MBGP routes are not filtered.
Examples
# Reference IPv6 ACL 2000 to filter all inbound IPv6 MBGP routes.
1-26