Display Ospfv3 Request-List - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

<Sysname> display ospfv3 peer statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
----------------------------------------------------------------------
Area ID
0.0.0.0
Total
Table 1-9 display ospfv3 peer statistic command output description
Field
Area ID
Down
Init
2-Way
ExStart
Exchange
Loading
Full
Total

display ospfv3 request-list

Syntax
display ospfv3 [ process-id ] request-list [ { external | inter-prefix | inter-router | intra-prefix | link |
network | router } [ link-state-id ] [ originate-router ip-address ] | statistics ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPFv3 process ID, in the range 1 to 65535.
external: Displays the AS-external LSA information of the OSPFv3 link state request list.
inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state request list.
inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state request list.
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state request list.
link: Displays the Link LSA information of the OSPFv3 link state request list.
Neighbor Statistics
Down
Init
2-way
0
0
0
0
0
0
Area ID
In this state, neighbor initial state, the router has not received any information from
a neighboring router for a period of time.
In this state, the device received a Hello packet from the neighbor but the packet
contains no Router ID of the neighbor. Mutual communication is not setup.
Indicates mutual communication between the router and its neighbor is available.
DR/BDR election is finished under this state (or higher).
In this state, the router decides on the initial DD sequence number and
master/slave relationship of the two parties.
In this state, the router exchanges DD packets with the neighbor.
In this state, the router sends LSRs to request the neighbor for needed LSAs.
Indicates LSDB synchronization has been accomplished between neighbors.
Total number of neighbors under the same state
ExStar
Exchange Loading
0
0
0
0
Description
1-15
Full
0
1
0
1

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents