Host-Aging-Time (Igmp-Snooping View); Igmp-Snooping - 3Com S7906E Command Reference Manual

host-aging-time (IGMP-Snooping view)

Syntax
host-aging-time interval
undo host-aging-time
View
IGMP-Snooping view
Default Level
2: System level
Parameters
interval: Dynamic member port aging time, in seconds. The effective range is 200 to 1,000.
Description
Use the host-aging-time command to configure the aging time of dynamic member ports globally.
Use the undo host-aging-time command to restore the default setting.
By default, the aging time of dynamic member ports is 260 seconds.
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP enabled
on their VLAN interfaces.
Related commands: igmp-snooping host-aging-time.
Examples
# Set the aging time of dynamic member ports globally to 300 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] host-aging-time 300

igmp-snooping

Syntax
igmp-snooping
undo igmp-snooping
View
System view
Default Level
2: System level
Parameters
None
Description
Use the igmp-snooping command to enable IGMP Snooping globally and enter IGMP-Snooping view.
1-7