Tcp Timer Fin-Timeout - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the reset tcp statistics command to clear statistics of TCP traffic.
Related commands: display tcp statistics.
Examples
# Display statistics of TCP traffic.
<Sysname> reset tcp statistics

tcp timer fin-timeout

Syntax
tcp timer fin-timeout time-value
undo tcp timer fin-timeout
View
System view
Default Level
2: System level
Parameters
time-value: Length of the TCP finwait timer in seconds, ranging from 76 to 3,600.
Description
Use the tcp timer fin-timeout command to configure the length of the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
Note that the actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of the
synwait timer
Related commands: tcp timer syn-timeout, tcp window.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800
1-19