Display Msdp Peer-Status - 3Com S7906E Command Reference Manual

Listen
Connect
Shutdown
Down
Peer's Address
State
Up/Down time
AS
SA Count
Reset Count

display msdp peer-status

Syntax
display msdp [ all-instance | vpn-instance vpn-instance-name ] peer-status [ peer-address ]
View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
peer-address: Specifies an MSDP peer by its address. If you do not provide this argument, this
command will display the detailed status information of all MSDP peers.
Description
Use the display msdp peer-status command to view the detailed MSDP peer status information.
Note that if neither all-instance nor vpn-instance is specified, this command will display the
information on the public instance.
Field
1-3
Description
Number of MSDP peers in the listen state
Number of MSDP peers in the connect state
Number of MSDP peers in the shutdown state
Number of MSDP peers in the down state
MSDP peer address
MSDP peer status:
Up: Session set up; MSDP peer in session
Listen: Session set up; local device as server,
in listening state
Connect: Session not set up; local device as
client, in connecting state
Shutdown: Deactivated
Down: Connection failed
Length of time since MSDP peer connection was
established/failed
Number of the AS where the MSDP peer is
located. "?" indicates that the system was unable
to obtain the AS number.
Number of (S, G) entries
MSDP peer connection reset times