If-Match Tag; Ip As-Path - 3Com S7906E Command Reference Manual

Examples
# Configure node 10 in permit mode of route policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal

if-match tag

Syntax
if-match tag value
undo if-match tag
View
Route policy view
Default Level
2: System level
Parameters
value: Specifies a tag from 0 to 4294967295.
Description
Use the if-match tag command to match routing information having the specified tag.
Use the undo if-match tag command to remove the match criterion.
The match criterion is not configured by default.
Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop,
if-match cost, route-policy, apply ip-address next-hop, apply cost, apply local-preference, apply
origin, apply tag.
Examples
# Configure node 10 in permit mode of route policy policy1 to permit RIP, OSPF and IS-IS routing
information with a tag of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match tag 8

ip as-path

Syntax
ip as-path as-path-number { deny | permit } regular-expression
undo ip as-path as-path-number
View
System view
1-18