3Com S7906E Command Reference Manual page 1023

View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-name: Peer group name, a string of 1 to 47 characters.
Description
Use the display bgp ipv6 group command to display IPv6 peer group information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display the information of the IPv6 peer group aaa.
<Sysname> display bgp ipv6 group aaa
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
20:20::20:1
Table 1-1 display bgp ipv6 group command output description
BGP peer-group
remote AS
Type
Maximum allowed prefix number
Threshold
hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
No routing policy is configured
V AS MsgRcvd MsgSent
4 200 170
Field
OutQ PrefRcv Up/Down
141 0 2 02:13:35 Established
Description
Name of the peer group
AS number of the peer group
Type of the peer group
Maximum allowed prefix number
Threshold value
Holdtime
Keepalive interval
Minimum interval between advertisements
Preferred value of the routes from the peer
No routing policy is configured for the peer
1-8
State