Static-Bind Client-Identifier - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

<Sysname> reset dhcp server statistics

static-bind client-identifier

Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Default Level
2: System level
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the format of
H-H-H..., each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example,
aabb-cccc-dd is a valid ID, while aabb-c-dddd and aabb-cc-dddd are both invalid.
Description
Use the static-bind client-identifier command to specify the client ID of a static binding in a DHCP
address pool.
Use the undo static-bind client-identifier command to remove the client ID of a static binding from a
DHCP address pool.
By default, no client ID is specified.
Note that:
Use the static-bind client-identifier command together with the static-bind ip-address
command to accomplish a static binding configuration.
The ID of the static binding of a client must be identical to the ID displayed by using the display
dhcp client verbose command on the client. Otherwise, the client cannot obtain an IP address.
If you use the static-bind client-identifier or static-bind mac-address command repeatedly, the
latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool, static-bind ip-address, static-bind mac-address, display
dhcp client verbose.
Examples
# Bind the client ID aaaa-bbbb to the IP address 10.1.1.1 with the mask 255.255.255.0 in DHCP
address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind client-identifier aaaa-bbbb
1-22

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents