Source-Lifetime (Pim View); Source-Policy (Pim View) - 3Com S7906E Command Reference Manual

interface interface-type interface-number: Specifies to reset the PIM control message counter on a
particular interface. If no interface is specified, this command will clear the statistics information of PIM
control messages on all interfaces.
Description
Use the reset pim control-message counters command to reset PIM control message counters.
Note that if neither all-instance nor vpn-instance is specified, this command will reset PIM control
message counters on the public instance.
Examples
# Reset PIM control message counters on all interfaces in the public instance.
<Sysname> reset pim control-message counters

source-lifetime (PIM view)

Syntax
source-lifetime interval
undo source-lifetime
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
interval: Multicast source lifetime in seconds, with an effective range of 1 to 65,535.
Description
Use the source-lifetime command to configure the multicast source lifetime.
Use the undo source-lifetime command to restore the system default.
By default, the lifetime of a multicast source is 210 seconds.
Examples
# Set the multicast source lifetime to 200 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] source-lifetime 200

source-policy (PIM view)

Syntax
source-policy acl-number
undo source-policy
1-47