Display Ospf Abr-Asbr - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in
OSPF area view. description is a string of up to 80 characters.
Description
Use the description command to configure a description for an OSPF process or area.
Use the undo description command to remove the description.
No description is configured by default.
Use of this command is only for the identification of an OSPF process or area. The description has no
special meaning.
Examples
# Describe the OSPF process 100 as abc.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe the OSPF area0 as bone area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] description bone area

display ospf abr-asbr

Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535. Use this argument to display information about
the routes to the ABR/ASBR under the specified OSPF process.
Description
Use the display ospf abr-asbr command to display information about the routes to OSPF ABR/ASBR.
If you use this command on routers in a stub area, no ASBR information is displayed.
1-8