C-Bsr Hash-Length (Pim View) - 3Com S7906E Command Reference Manual

View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
group-address: Multicast group address, in the range of 239.0.0.0 to 239.255.255.255.
mask: Mask of the multicast group address.
mask-length: Mask length of the multicast group address, in the range of 8 to 32.
hash-length: Hash mask length in the admin-scope region corresponding to the specified multicast
group, in the range of 0 to 32. If you do not include this argument in your command, the corresponding
global setting will be used.
priority: Priority of the C-BSR in the admin-scope region corresponding to a multicast group, in the
range of 0 to 255. If you do not include this argument in your command, the corresponding global setting
will be used. A larger value of this argument means a higher priority.
Description
Use the c-bsr group command to configure a C-BSR for the admin-scope region associated with the
specified group.
Use the undo c-bsr group command to remove the C-BSR configuration for the admin-scope region
associated with the specified group.
By default, no C-BSRs are configured for admin-scope regions.
Related commands: c-bsr global, c-bsr admin-scope, c-bsr hash-length, c-bsr priority.
Examples
# In the public instance configure the router to be a C-BSR in the admin-scope region associated with
the multicast group address 239.0.0.0/8, with the priority of 10.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr group 239.0.0.0 255.0.0.0 priority 10

c-bsr hash-length (PIM view)

Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
1-5