Igmp Static-Group - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
interval: Startup query interval in seconds, namely, the interval between general queries the IGMP
querier sends on startup, with an effective range of 1 to 18000.
Description
Use the igmp startup-query-interval command to configure the startup query interval on the current
interface.
Use the undo igmp startup-query-interval command to restore the system default.
By default, the startup query interval is 1/4 of the IGMP query interval.
By default, the IGMP query interval is 60 seconds, so the startup query interval = 60 / 4 = 15 (seconds).
Related commands: startup-query-interval, igmp timer query.
Examples
# Set the startup query interval to 5 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp startup-query-interval 5

igmp static-group

Syntax
igmp static-group group-address [ source source-address ]
undo igmp static-group { all | group-address [ source source-address ] }
View
Interface view
Default Level
2: System level
Parameters
all: Specifies to remove all static multicast groups that the current interface has joined.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
source-address: Multicast source address.
1-18