Display Bgp Multicast Routing-Table Peer - 3Com S7906E Command Reference Manual

<Sysname> display bgp multicast routing-table flap-info
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Network
*> 55.0.0.0
*d 77.0.0.0
Table 1-11 display bgp multicast routing-table flap-info command output description
Field
From
Flaps
Duration
Reuse
Refer to Table 1-8

display bgp multicast routing-table peer

Syntax
display bgp multicast routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ]
View
Any view
Default Level
2: Monitor level
Parameters
ip-address: IP address of an IPv4 MBGP peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
statistic: Displays route statistics.
Description
Use the display bgp multicast routing-table peer command to display IPv4 MBGP routing
information advertised to or received from the specified IPv4 MBGP peer.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
From Flaps
12.1.1.1 2
12.1.1.1 5
Source IP address of the route
Number of routing flaps
Route flap duration
Reuse time of the route
for description on the other fields above.
Duration Reuse
00:00:16
00:34:02 00:27:08
Description
1-26
Path/Origin
100?
100?