Reset Rrpp Statistics - 3Com S7906E Command Reference Manual

Before configuring rings for an RRPP domain, you must configure protected VLANs for the domain
first.
Before configuring rings for an RRPP domain, you can delete or modify the protected VLANs
configured for the RRPP domain; after configuring rings for an RRPP domain, you can delete or
modify the protected VLANs configured for the RRPP domain, however, you cannot delete all the
protected VLANs configured for the domain.
Deleting an RRPP domain deletes its protected VLANs at the same time.
When the VLAN-to-MSTI mappings change, the protected VLANs of an RRPP domain also
changes according to the MSTIs configured for the domain.
All the VLANs permitted to pass through RRPP ports must be configured as protected VLANs of
the RRPP domain.
To be compatible with old-version RRPP, which does not support protected VLAN configuration, an
RRPP domain protects all VLANs on a device started with an old-version configuration file.
Related commands: rrpp domain, control-vlan, display stp region-configuration in MSTP
Configuration Commands in the Access Volume.
Examples
# Configure VLANs mapped to MSTI 2 and MSTI 3 as the protected VLANs of RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protected-vlan reference-instance 2 to 3

reset rrpp statistics

Syntax
reset rrpp statistics domain domain-id [ ring ring-id ]
View
User view
Default Level
1: Monitor level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
ring-id: RRPP ring ID, in the range 1 to 64.
Description
Use the reset rrpp statistics command to clear RRPP message statistics.
If you have specified an RRPP ring ID in the command, RRPP message statistics of the specified RRPP
ring in the specified RRPP domain on the current device is cleared. Otherwise, RRPP message
statistics of all RRPP rings in the specified RRPP domain is cleared.
Related commands: display rrpp statistics.
1-11