Display Rip Database - 3Com S7906E Command Reference Manual

Field
Silent interfaces
Default routes
Default route cost
Verify-source
Networks
Configured peers
Triggered updates sent
Number of routes changes
Number of replies to queries

display rip database

Syntax
display rip process-id database
View
Any view
Default Level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
Description
Use the display rip database command to display the active routes in the RIP database, which are
sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 6, ClassfulSumm
10.0.0.0/8, cost 6, nexthop 192.168.0.37
192.168.0.0/24, cost 0, ClassfulSumm
192.168.0.0/24, cost 0, nexthop 192.168.0.73, Rip-interface
Description
Number of silent interfaces, which do not periodically
send updates
Indicates whether a default route is sent to RIP neighbors
only means only a default route is advertised.
originate means a default route is advertised along
with other routes.
disable means no default route is advertised.
Cost of the default route
Indicates whether the source IP address is checked on
the received RIP routing updates
Networks enabled with RIP
Configured neighbors
Number of sent triggered updates
Number of changed routes in the database
Number of RIP responses
1-5