Holdtime Assert (Ipv6 Pim View); Holdtime Join-Prune (Ipv6 Pim View) - 3Com S7906E Command Reference Manual

holdtime assert (IPv6 PIM view)

Syntax
holdtime assert interval
undo holdtime assert
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use the holdtime assert command to configure the global value of the assert timeout time.
Use the undo holdtime assert command to restore the system default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime join-prune, pim ipv6 holdtime join-prune, pim ipv6 holdtime assert.
Examples
# Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100

holdtime join-prune (IPv6 PIM view)

Syntax
holdtime join-prune interval
undo holdtime join-prune
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the holdtime join-prune command to configure the global value of the join/prune timeout time.
Use the undo holdtime join-prune command to restore the system default.
1-26