Ip Forward-Broadcast (Interface View) - 3Com S7906E Command Reference Manual

Table 1-8 display udp statistics command output description
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
Received
packets:
broadcast/multicast(no socket
on port)
not delivered, input socket full
input packets missing pcb
cache
Sent
Total
packets:

ip forward-broadcast (interface view)

Syntax
ip forward-broadcast [ acl acl-number ]
undo ip forward-broadcast
View
Interface view
Default Level
2: System level
Parameters
acl acl-number: Number of an ACL from 2000 to 3999. From 2000 to 2999 are numbers for basic ACLs,
and from 3000 to 3999 are numbers for advanced ACLs. Only directed broadcasts permitted by the ACL
can be forwarded.
Description
Use the ip forward-broadcast command to enable the interface to forward directed broadcasts.
Use the undo ip forward-broadcast command to disable an interface from forwarding directed
broadcasts.
By default, an interface is disabled from forwarding directed broadcasts.
Examples
# Allow VLAN-interface 2 to forward directed broadcasts permitted by ACL 2001.
<Sysname> system-view
[Sysname] interface vlan-interface 2
Field Description
Total number of UDP packets received
Total number of packets with incorrect checksum
Number of packets with data shorter than head
Number of packets with data longer than packet
Number of unicast packets with no socket on port
Number of broadcast/multicast packets without
socket on port
Number of packets not delivered to upper layer due
to socket buffer being full
Number of packets without matching protocol
control block (PCB) cache
Total number of UDP packets sent
1-15