Peer Ebgp-Max-Hop (Ipv6 Address Family View); Peer Fake-As (Ipv6 Address Family View) - 3Com S7906E Command Reference Manual

[Sysname-bgp-af-ipv6] peer test description ISP1

peer ebgp-max-hop (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ]
undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop
View
IPv6 address family view
Default Level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
hop-count: Maximum hop count, in the range 1 to 255. By default, the value is 64.
Description
Use the peer ebgp-max-hop command to allow establishing the EBGP connection to a peer/peer
group indirectly connected.
Use the undo peer ebgp-max-hop command to remove the configuration.
By default, this feature is disabled.
You can use the argument hop-count to specify the maximum router hops of the EBGP connection.
Examples
# Allow establishing the EBGP connection with the peer group test on an indirectly connected network.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test ebgp-max-hop

peer fake-as (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } fake-as as-number
undo peer { ipv6-group-name | ipv6-address } fake-as
View
IPv6 address family view
Default Level
2: System level
1-33