Multicast Load-Splitting; Multicast Longest-Match - 3Com S7906E Command Reference Manual

[Sysname-vpn-instance-mvpn] multicast forwarding-table route-limit 200

multicast load-splitting

Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
View
System view, VPN instance view
Default Level
2: System level
Parameters
source: Specifies to implement per-source load splitting.
source-group: Specifies to implement per-source and per-group load splitting simultaneously.
Description
Use the multicast load-splitting command to enable load splitting of multicast traffic.
Use the undo multicast load-splitting command to disable load splitting of multicast traffic.
By default, load splitting of multicast traffic is disabled.
Examples
# Enable per-source load splitting of multicast traffic in the public instance.
<Sysname> system-view
[Sysname] multicast load-splitting source
# Enable per-source load splitting of multicast traffic in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast load-splitting source

multicast longest-match

Syntax
multicast longest-match
undo multicast longest-match
View
System view, VPN instance view
Default Level
2: System level
Parameters
None
1-15