Display Bgp Multicast Peer - 3Com S7906E Command Reference Manual

Field
Origin

display bgp multicast peer

Syntax
display bgp multicast peer [ ip-address ] [ verbose ]
View
Any view
Default Level
2: Monitor level
Parameters
ip-address: IP address of an IPv4 MBGP peer to be displayed, in dotted decimal notation.
verbose: Displays the detailed information of the peer/peer group.
Description
Use the display bgp multicast peer command to display IPv4 MBGP peer information.
Examples
# Display the detailed information of the IPv4 MBGP peer 10.110.25.20.
<Sysname> display bgp multicast peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port:
Configured: Active Hold Time: 180 sec
Received
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Origin attribute of the path:
Indicates the route is interior to the AS.
i
Summary routes and routes injected using the network
command are considered IGP routes.
Indicates the route is learned from the Exterior Gateway
e
Protocol (EGP).
Indicates the origin of the route is unknown. Routes redistributed
?
from other routing protocols have this origin attribute.
Local - 1029 Remote - 179
: Active Hold Time: 180 sec
Description
Keepalive Time: 60 sec
1-16