3Com S7906E Command Reference Manual page 821

IPV4 Destination
--------------------------------------------------------------------------
1.1.0.0/16
1.2.0.0/16
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 1-11 display isis route command output description
Field
Route information for ISIS(1)
ISIS(1) IPv4 Level-1 Forwarding Table
ISIS(1) IPv4 Level-2 Forwarding Table
IPv4 Destination
IntCost
ExtCost
ExitInterface
NextHop
Flags
# Display detailed IS-IS IPv4 routing information.
<Sysname>display isis route verbose
IPV4 Dest : 1.1.0.0/16
Admin Tag : -
NextHop :
1.2.1.1
IPV4 Dest : 1.2.0.0/16
Admin Tag : -
NextHop :
Direct
-------------------------------------
IntCost ExtCost ExitInterface
20 NULL
10 NULL
Route information for IS-IS process 1
IS-IS IPv4 routing information for Level-1
IS-IS IPv4 routing information for Level-2
IPv4 destination address
Interior routing cost
Exterior routing cost
Exit interface
Next hop
Routing state flag
D: Direct route.
R: The route has been added into the routing table.
L: The route has been advertised in an LSP.
U: A route's penetration flag. Setting it to UP can prevent
an LSP sent from L2 to L1 from being sent back to L2.
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
Int. Cost : 20
Src Count : 2
Interface :
Vlan1
Int. Cost : 10
Src Count : 2
Interface :
Vlan1
1-22
NextHop
Vlan1 Direct
Description
Ext. Cost : NULL
Flag
ExitIndex :
Ext. Cost : NULL
Flag
ExitIndex :
Flags
D/L/-
: R/L/-
0x00000008
: D/L/-
0x00000000