Peer Public-As-Only (Mbgp Family View) - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Default Level
2: System level
Parameters
group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.
ip-address: IP address of an IPv4 MBGP peer.
value: Preferred value, in the range 0 to 65535.
Description
Use the peer preferred-value command to specify a preferred value for routes received from a peer or
peer group.
Use the undo peer preferred-value command to restore the default value.
The default preferred value is 0.
Routes learned from a peer have an initial preferred value. Among multiple routes that have the same
destination/mask and are learned from different peers, the one with the greatest preferred value is
selected as the route to the destination.
Note that:
If you both reference a route policy and use the peer { group-name | ip-address } preferred-value value
command to set a preferred value for routes from a peer/peer group, the route policy sets a specified
non-zero preferred value for routes matching it. Other routes not matching the route policy uses the
value set with the peer preferred-value command. If the preferred value specified in the route policy is
zero, the routes matching it will also use the value set with the command.
For information about using a route policy to set a preferred value, refer to the command peer
{ group-name | ip-address } route-policy route-policy-name { export | import } in this document, and
the command apply preferred-value preferred-value in Route policy Commands of the IP Routing
Volume.
Examples
# In IPv4 MBGP address family view, configure the preferred value as 50 for routes from peer
131.108.1.1.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp] peer 131.108.1.1 as-number 100
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer 131.108.1.1 enable
[Sysname-bgp-af-mul] peer 131.108.1.1 preferred-value 50

peer public-as-only (MBGP family view)

Syntax
peer { group-name | ip-address } public-as-only
undo peer { group-name | ip-address } public-as-only
View
IPv4 MBGP address family view
1-41

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S7906E and is the answer not in the manual?

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents