3Com S7906E Command Reference Manual page 818

vpn-instance-name: Displays the IS-IS neighbor information of the VPN instance. The
vpn-instance-name is a string of 1 to 31 characters.
Description
Use the display isis peer command to display IS-IS neighbor information.
Examples
# Display brief IS-IS neighbor information.
<Sysname> display isis peer
System Id: 1111.1111.1111
Interface: Vlan-interface1
State: Up
System Id: 1111.1111.1111
Interface: Vlan-interface1
State: Up
# Display detailed IS-IS neighbor information.
<Sysname>display isis peer verbose
System Id: 1111.1111.1111
Interface: Vlan-interface1
State: Up
Area Address(es):10
Peer IP Address(es): 3.1.1.2
Uptime: 00:38:15
Adj Protocol:
System Id: 1111.1111.1111
Interface: Vlan-interface1
State: Up
Area Address(es):10
Peer IP Address(es): 3.1.1.2
Uptime: 00:38:15
Adj Protocol:
Peer information for ISIS(1)
----------------------------
HoldTime: 23s
HoldTime: 23s
Peer information for ISIS(1)
----------------------------
HoldTime: 27s
IPV4
HoldTime: 28s
IPV4
Circuit Id: 1111.1111.1112.01
Type: L1(L1L2) PRI: 64
Circuit Id: 1111.1111.1112.01
Type: L2(L1L2) PRI: 64
Circuit Id: 1111.1111.1112.01
Type: L1(L1L2) PRI: 64
Circuit Id: 1111.1111.1112.01
Type: L2(L1L2) PRI: 64
1-19