Display Ipv6 Routing-Table Protocol; Display Ipv6 Routing-Table Statistics - 3Com S7906E Command Reference Manual

display ipv6 routing-table protocol

Syntax
display ipv6 routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol: Displays routes of a routing protocol, which can be bgp4+, direct, isisv6, ospfv3, ripng and
static.
inactive: Displays only inactive routes. Without the keyword, all active and inactive routes are
displayed.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
Description
Use the display ipv6 routing-table protocol command to display routes of a specified routing
protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Direct Routing Table's Status : < Inactive >
Summary Count : 0
Refer to Table 1-6

display ipv6 routing-table statistics

Syntax
display ipv6 routing-table statistics
View
Any view
for description about the above output.
Protocol
Preference: 0
Cost
1-19
: Direct
: 0