Ipv6 Default-Route-Advertise - 3Com S7906E Command Reference Manual

Direct
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 1-2 display isis route ipv6 verbose command output description
Field
IPV6 Dest
Cost
Flag/Flags
Admin Tag
Src Count
Next Hop
Interface
ExitIndex

ipv6 default-route-advertise

Syntax
ipv6 default-route-advertise [ [ level-1 | level-2 | level-1-2 ] | route-policy route-policy-name ] *
undo ipv6 default-route-advertise [ route-policy route-policy-name ]
View
IS-IS view
Default Level
2: System level
Parameters
route-policy-name: Specifies the name of a routing policy with a string of 1 to 19 characters.
level-1: Specifies the default route as Level-1.
level-2: Specifies the default route as Level-2.
level-1-2: Specifies the default route as Level-1-2.
IPv6 destination
Value of cost
Flag of routing information status
D: This is a direct route.
R: The route has been added into the routing table.
L: The route has been advertised in a LSP.
U: Route leaking flag, indicating the Level-1 route is from Level-2. U means
the route will not be returned to Level-2.
Administrative tag
Number of advertisement sources
Next hop
Outbound interface
Outbound interface index
1-3
Vlan200
Description
0x00000000