Opaque-Capability Enable - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
default-route-advertise: Usable on an NSSA ABR or an ASBR only. If it is configured on an NSSA
ABR, the ABR generates a default route in a Type-7 LSA into the NSSA regardless of whether the
default route is available. If it is configured on an ASBR, only a default route is available on the ASBR
can it generates the default route in a Type-7 LSA into the attached area.
no-import-route: Usable only on an NSSA ABR that is also the ASBR of the OSPF routing domain to
disable redistributing routes in Type7 LSAs into the NSSA area, making sure that routes can be
redistributed correctly.
no-summary: Usable only on an NSSA ABR to advertise only a default route in a Type-3 summary LSA
into the NSSA area. In this way, all the other summary LSAs are not advertised into the area. Such an
area is known as an NSSA totally stub area.
Description
Use the nssa command to configure the current area as an NSSA area.
Use the undo nssa command to restore the default.
By default, no NSSA area is configured.
All routers attached to an NSSA area must be configured with the nssa command in area view.
Related commands: default-cost.
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa

opaque-capability enable

Syntax
opaque-capability enable
undo opaque-capability
View
OSPF view
Default Level
2: System level
Parameters
None
1-44