Version (Mld View) - 3Com S7906E Command Reference Manual

undo timer query
View
MLD view
Default Level
2: System level
Parameters
interval: MLD query interval, namely, amount of time in seconds between MLD general queries, in the
range of 1 to 18,000.
Description
Use the timer query command to configure the MLD query interval globally.
Use the undo timer query command to restore the system default.
By default, the MLD query interval is 125 seconds.
Related commands: mld timer query, timer other-querier-present, display mld interface.
Examples
# Set the MLD query interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer query 200

version (MLD view)

Syntax
version version-number
undo version
View
MLD view
Default Level
2: System level
Parameters
version-number: MLD version number, 1 or 2.
Description
Use the version command to configure the MLD version globally.
Use the undo version command to restore the default MLD version.
By default, the MLD version is MLDv1.
Related commands: mld version.
1-29