Dhcp Relay Server-Group; Dhcp Relay Server-Select - 3Com S7906E Command Reference Manual

dhcp relay server-group

Syntax
dhcp relay server-group group-id ip ip-address
undo dhcp relay server-group group-id [ ip ip-address ]
View
System view
Default Level
2: System level
Parameters
group-id: DHCP server group number, in the range of 0 to 19.
ip ip-address: DHCP server IP address.
Description
Use the dhcp relay server-group command to specify a DHCP server for a DHCP server group.
Use the undo dhcp relay server-group command to remove a DHCP server from a DHCP server
group, if no ip ip-address is specified, all servers in the DHCP server group and the server group itself
will be removed.
By default, no DHCP server is specified for a DHCP server group.
Note that:
The IP address of any DHCP server and any interface's IP address of the DHCP relay agent
cannot be in the same network segment. Otherwise, the client may fail to obtain an IP address.
If a server group has been correlated to multiple interfaces, you need to cancel these correlations
before removing the server group.
Related commands: display dhcp relay server-group.
Examples
# Specify DHCP server 1.1.1.1 for DHCP server group 1 on the relay agent.
<Sysname> system-view
[Sysname] dhcp relay server-group 1 ip 1.1.1.1

dhcp relay server-select

Syntax
dhcp relay server-select group-id
undo dhcp relay server-select
View
Interface view
Default Level
2: System level
2-10