Ripng Metricout - 3Com S7906E Command Reference Manual

View
Interface view
Default Level
2: System level
Parameters
value: Additional metric for received routes, in the range of 0 to 16.
Description
Use the ripng metricin command to specify an additional metric for received RIPng routes.
Use the undo ripng metricin command to restore the default.
By default, the additional metric to received routes is 0.
Related commands: ripng metricout.
Examples
# Specify the additional routing metric as 12 for RIPng routes received by VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricin 12

ripng metricout

Syntax
ripng metricout value
undo ripng metricout
View
Interface view
Default Level
2: System level
Parameters
value: Additional metric to advertised routes, in the range of 1 to 16.
Description
Use the ripng metricout command to configure an additional metric for RIPng routes advertised by an
interface.
Use the undo rip metricout command to restore the default.
The default additional routing metric is 1.
Related commands: ripng metricin.
Examples
# Set the additional metric to 12 for routes advertised by VLAN-interface 100.
1-13