Is-Name Map; Is-Snmp-Traps Enable - 3Com S7906E Command Reference Manual

is-name map

Syntax
is-name map sys-id map-sys-name
undo is-name map sys-id
View
IS-IS view
Default Level
2: System level
Parameters
sys-id: System ID or pseudonode ID of a remote IS.
map-sys-name: Specifies a host name for the remote IS, a string of 1 to 64 characters.
Description
Use the is-name map command to configure a system ID to host name mapping for a remote IS.
Use the undo is-name map command to remove the mapping.
Each remote IS system ID corresponds to only one name.
Examples
# Map the host name RUTB to the system ID 0000.0000.0041 of the remote IS.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB

is-snmp-traps enable

Syntax
is-snmp-traps enable
undo is-snmp-traps
View
IS-IS view
Default Level
2: System level
Parameters
None
Description
Use the is-snmp-traps enable command to enable the SNMP Trap function of IS-IS.
Use the undo is-snmp-traps command to disable this function.
1-50