3Com S7906E Command Reference Manual page 749

View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
all: Display the OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Description
Use the display ospf interface command to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes is displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Area: 0.0.0.0
IP Address
192.168.1.1
Area: 0.0.0.1
IP Address
172.16.0.1
Table 1-6 display ospf interface command output description
Field
Area
IP address
Type
Interfaces
Type State
PTP P-2-P
Type State
Broadcast DR
Area ID of the interface
Interface IP address (regardless of whether TE is enabled or not)
Interface network type:
PTP, PTMP, Broadcast, or NBMA
Cost Pri DR
1562 1 0.0.0.0
Cost Pri DR
1 1 172.16.0.1
Description
1-17
BDR
0.0.0.0
BDR
0.0.0.0