3Com S7906E Command Reference Manual page 975

network: Displays the Network-LSA information of the OSPFv3 link state request list.
router: Displays the Router-LSA information of the OSPFv3 link state request list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state request list.
Description
Use the display ospfv3 request-list command to display OSPFv3 link state request list information.
If no process is specified, the link state request list information of all OSPFv3 processes is displayed.
Examples
# Display the information of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Vlan100
--------------------------------------------------------------------------
LS-Type
Router-LSA
Table 1-10 display ospfv3 request-list command output description
Interface
Area-ID
Nbr-ID
LS-Type
LS-ID
AdvRouter
SeqNum
Age
CkSum
# Display the statistics of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list statistics
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor
Vlan100 10.1.1.1
Table 1-11 display ospfv3 request-list statistics command output description
Interface
Neighbor
Area-ID 0.0.0.0
Nbr-ID 12.1.1.1
LS-ID AdvRouter
0.0.0.0 12.1.1.1
Field
LSA-Count
0
Field
1-16
SeqNum
0x80000014
Description
Interface name
Area ID
Neighbor router ID
Type of LSA
Link state ID
Advertising router
LSA sequence number
Age of LSA
Checksum
Description
Interface name
Neighbor router ID
Age CkSum
774 0xe5b0