Display Fib Ip-Address - 3Com S7906E Command Reference Manual

R:Reject L:Generated by ARP or ESIS
Destination/Mask
10.2.1.1/32
127.0.0.0/8
127.0.0.1/32
# Display FIB information passing the IP prefix list abc0
<Sysname> system-view
[Sysname] ip ip-prefix abc0 permit 10.2.0.0 16
[Sysname] display fib ip-prefix abc0
Route Entry matched by prefix-list abc0:
Summary count: 1
Flag:
U:Useable G:Gateway
R:Reject L:Generated by ARP or ESIS
Destination/Mask
10.2.0.0/16

display fib ip-address

Syntax
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 | mask-length2 } | longer ] |
longer ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address1, ip-address2: Destination IP address, in dotted decimal notation. ip-address1 and
ip-address2 together determine an address range for the FIB entries to be displayed.
mask1, mask2: IP address mask.
mask-length1, mask-length2: Length of IP address mask.
longer: Displays FIB entries that match the specified address/mask and have masks longer than or
equal to the mask that a user enters. If no masks are specified, FIB entries that match the natural
network address and have the masks longer than or equal to the natural mask will be displayed.
Description
Use the display fib ip-address command to display FIB entries that match the specified destination IP
address.
Nexthop Flag TimeStamp
127.0.0.1 HU t[1150900568]
127.0.0.1 U t[1150623094]
127.0.0.1 HU t[1150623094]
H:Host B:Blackhole
Nexthop Flag TimeStamp
0.0.0.0 U t[1150900568]
Interface
InLoop0
InLoop0
InLoop0
D:Dynamic
Interface
Vlan1
1-3
Token
invalid
invalid
invalid
S:Static
Token
invalid