Display Msdp Sa-Cache - 3Com S7906E Command Reference Manual

Counters for MSDP message

display msdp sa-cache

Syntax
display msdp [ all-instance | vpn-instance vpn-instance-name ] sa-cache [ group-address |
source-address | as-number ] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address: Multicast group address in the (S, G) entry, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Multicast source address in the (S, G) entry.
as-number: AS number, in the range of 1 to 65535.
Description
Use the display msdp sa-cache command to view the information of (S, G) entries in the SA cache.
Note that:
If you do not specify all-instance nor vpn-instance, this command will display the information on the
public instance.
This command gives the corresponding output only after the cache-sa-enable command is
executed.
If you do not provide a group address, this command will display the (S, G) entry information for all
multicast groups.
If you do not provide a source address, this command will display the (S, G) entry information for all
sources.
Field
1-6
Description
MSDP peer statistics:
Count of RPF check failure: Number of SA
messages discarded due to RPF check
failure
Incoming/outgoing SA messages: Number of
SA messages received and sent
Incoming/outgoing SA requests: Number of
SA request received and sent
Incoming/outgoing SA responses: Number of
SA responses received and sent
Incoming/outgoing data packets: Number of
received and sent
encapsulated with multicast data
SA messages