Display Bgp Routing-Table Peer - 3Com S7906E Command Reference Manual

Total Number of Routes: 2
Network
*> 4.4.4.4/32
*> 5.5.5.5/32
The In/Out Label field refers to the inbound/outbound label. Refer to
other fields.

display bgp routing-table peer

Syntax
display bgp
[ network-address [ mask | mask-length ] | statistic ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: IP address of a peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
statistic: Displays route statistics.
Description
Use the display bgp routing-table peer command to display BGP routing information advertised to or
received from the specified BGP peer.
Related commands: display bgp peer.
Examples
# Display BGP routing information advertised to BGP peer 20.20.20.1.
<Sysname> display bgp routing-table peer 20.20.20.1 advertised-routes
Total Number of Routes: 2
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
127.0.0.1
1.1.1.1
routing-table peer
In/Out Label
3/NULL
NULL/1024
ip-address { advertised-routes
1-28
Table 1-6 for the description of
| received-routes }