Ospfv3 Timer Poll; Ospfv3 Trans-Delay - 3Com S7906E Command Reference Manual

ospfv3 timer poll

Syntax
ospfv3 timer poll seconds [ instance instance-id ]
undo ospfv3 timer poll [ instance instance-id ]
View
Interface view
Default Level
2: System level
Parameters
seconds: Poll interval in seconds, in the range 1 to 65535.
instance-id: Interface instance ID, in the range 0 to 255. The default is 0.
Description
Use the ospfv3 timer poll command to set the poll interval on an NBMA interface.
Use the undo ospfv3 timer poll command to restore the default value.
By default, the poll interval is 120 seconds.
Currently, the S7900E series Ethernet switches do not support configuring the ospfv3 timer poll
command on a loopback interface.
Examples
# Set the poll timer interval on the current interface to 130 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer poll 130

ospfv3 trans-delay

Syntax
ospfv3 trans-delay seconds [ instance instance-id ]
undo ospfv3 trans-delay [ instance instance-id ]
View
Interface view
Default Level
2: System level
1-35