Static Routing Configuration Commands - 3Com S7906E Command Reference Manual

1

Static Routing Configuration Commands

The term "router" in this document refers to a router in a generic sense or a Layer 3 switch.
Static Routing Configuration Commands
delete static-routes all
Syntax
delete [ vpn-instance vpn-instance-name ] static-routes all
View
System view
Default Level
2: System level
Parameters
vpn-instance-name: Name of a VPN instance, a string of 1 to 31 case-sensitive characters.
Description
Use the delete static-routes all command to delete all static routes.
When you use this command to delete static routes, the system will prompt you to confirm the operation
before deleting all the static routes.
Related commands: display ip routing-table, ip route-static.
Examples
# Delete all static routes on the router.
<Sysname> system-view
[Sysname] delete static-routes all
This will erase all ipv4 static routes and their configurations, you must reconf
igure all static routes
Are you sure?[Y/N]:Y
1-1