Display Bgp Ipv6 Multicast Network - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
Members
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State

display bgp ipv6 multicast network

Syntax
display bgp ipv6 multicast network
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display bgp ipv6 multicast network command to display the IPv6 MBGP routes advertised
with the network command.
Examples
# Display IPv6 MBGP routes advertised with the network command.
<Sysname> display bgp ipv6 multicast network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network
Field
Mask
Route-policy
Hold timer value
Keepalive interval
Minimum interval for route advertisement
Preferred value of the routes from the peer
Group members
IPv6 address of the peer
Peer BGP version
AS number
Number of messages received
Number of messages sent
Number of messages to be sent
Number of prefixes received
The lasting time of a session/the lasting time of
present state (when no session is established)
Peer state machine
Short-cut
1-12
Description

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents