Display Pim Ipv6 Join-Prune - 3Com S7906E Command Reference Manual

Table 1-5 display pim ipv6 interface command output description
Interface
PIM version
PIM mode
PIM DR
PIM DR Priority (configured)
PIM neighbor count
PIM hello interval
PIM LAN delay (negotiated)
PIM LAN delay (configured)
PIM override interval (negotiated)
PIM override interval (configured)
PIM neighbor tracking (negotiated)
PIM neighbor tracking (configured)
PIM generation ID
PIM require generation ID
PIM hello hold interval
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
PIM J/P hold interval
PIM BSR domain border
Number of routers on network not using DR
priority
Number of routers on network not using LAN
delay
Number of routers on network not using neighbor
tracking

display pim ipv6 join-prune

Syntax
display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface interface-type
interface-number | neighbor ipv6-neighbor-address ] * [ verbose ]
Field
1-15
Description
Interface name and its IPv6 address
IPv6 PIM version
IPv6 PIM mode, dense or sparse
IPv6 address of the DR
Priority for DR election
Total number of IPv6 PIM neighbors
Interval between IPv6 PIM hello messages
Negotiated prune delay
Configured prune delay
Negotiated prune override interval
Configured prune override interval
Negotiated neighbor tracking status
(enabled/disabled)
Configured neighbor tracking status
(enabled/disabled)
Generation_ID value
Rejection of Hello messages without
Generation_ID (enabled/disabled)
IPv6 PIM neighbor timeout time
Assert timeout time
Maximum delay of sending hello messages
Join/prune interval
Join/prune timeout time
Status of PIM domain border configuration
(enabled/disabled)
Number of routers not using the DR priority field
on the subnet where the interface resides
Number of routers not using the LAN delay field
on the subnet where the interface resides
Number of routers not using neighbor tracking on
the subnet where the interface resides