Multicast Vlan Configuration Commands - 3Com S7906E Command Reference Manual

1

Multicast VLAN Configuration Commands

Multicast VLAN Configuration Commands
display multicast-vlan
Syntax
display multicast-vlan [ vlan-id ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-id: VLAN ID of a multicast VLAN, in the range of 1 to 4094. If this argument is not provided, the
information about all multicast VLANs will be displayed.
Description
Use the display multicast-vlan command to view the information about the specified multicast VLAN.
Examples
# View the information about all multicast VLANs.
<Sysname> display multicast-vlan
Total 4 multicast-vlan(s)
Multicast vlan 100
subvlan list:
vlan 2 4-6
port list:
no port
Multicast vlan 200
subvlan list:
no subvlan
port list:
Eth2/0/1
Multicast vlan 300
subvlan list:
vlan 3
port list:
Eth2/0/2
1-1