3Com S7906E Command Reference Manual page 672

State: Active Adv
Tag: 0
Destination: 10.1.1.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Destination: 127.0.0.0/8
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Destination: 127.0.0.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed description of each route (in
sequence).
Table 1-2 display ip routing-table verbose command output description
Field
Destination Destination address/mask length
Protocol Protocol that presents the route
Process ID Process ID
Preference Priority of the route
Cost Cost of the route
NextHop Address of the next hop on the route
Interface Outbound interface for packets to be forwarded along the route
RelyNextHop The next hop address obtained through routing recursion
Neighbour Neighboring address determined by Routing Protocol
Tunnel ID Tunnel ID
Age: 00h00m30s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Label: NULL
Age: 00h00m30s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Label: NULL
Age: 00h00m36s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Label: NULL
Age: 00h00m36s
Description
1-3