Peer Filter-Policy (Mbgp Family View); Peer Group (Mbgp Family View) - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]peer 18.10.0.9 as-number 100
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer 18.10.0.9 enable

peer filter-policy (MBGP family view)

Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import }
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.
ip-address: IP address of an IPv4 MBGP peer.
acl-number: ACL number, in the range 2000 to 3999.
export: Uses the ACL to filter routes outgoing to the peer/peer group.
import: Uses the ACL to filter routes incoming from the peer/peer group.
Description
Use the peer filter-policy command to configure an ACL-based filter policy for a peer or peer group.
Use the undo peer filter-policy command to remove the filtering.
By default, no ACL-based filter policy is configured for a peer or peer group.
Related commands: peer as-path-acl.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter routes sent to the peer group test.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]group test external
[Sysname-bgp]peer test as-number 200
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test filter-policy 2000 export

peer group (MBGP family view)

Syntax
peer ip-address group group-name
1-37