Udp-Helper Enable; Udp-Helper Port - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the reset udp-helper packet command to clear the statistics of UDP packets forwarded.
Related commands: display udp-helper server.
Examples
# Clear the statistics of the forwarded UDP packets.
<Sysname> reset udp-helper packet

udp-helper enable

Syntax
udp-helper enable
undo udp-helper enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the udp-helper enable command to enable UDP Helper. The device enabled with UDP Helper
functions as a relay agent that converts UDP broadcast packets into unicast packets and forwards them
to a specified destination server.
Use the undo udp-helper enable command to disable UDP Helper.
By default, UDP Helper is disabled.
Examples
# Enable UDP Helper
<Sysname> system-view
[Sysname] udp-helper enable

udp-helper port

Syntax
udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
1-2