Display Router Id - 3Com S7906E Command Reference Manual

Parameters
None
Description
Use the display ipv6 relay-tunnel command to display IPv6 recursive tunnel information.
Examples
# Display IPv6 recursive tunnel information.
<Sysname> display ipv6 relay-tunnel
Total Number of relay-tunnel is: 1.
Dest/Mask: 192::0/64
Related instance id(always 0): 0(1)
Table 1-10 display ipv6 relay-tunnel command output description
Total Number of Relay-tunnel
Dest/Mask
Related instance id(always 0)

display router id

Syntax
display router id
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display router id command to display the router ID.
Examples
# Display the router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
Field
Total number of recursive tunnels
Destination address/mask of the recursive tunnel
IPv6 supports public networks only. Therefore, the instance
ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the recursive
route in the routing table.
Description
1-23